636 owner's question

[Drag on]

I can't seem to figure out programing the shift light on my 636, of course i didn't get a manual from good ole comp. I have been hounding my salesman, but if you have delt with comp then you know.
thanks...

[In The Blood]

3 modes: light off, light on(dim), light on (bright)
can be adjusted between 12K and 15,5K rpm
- Push MODE and RESET button simultaneously for more than 2 seconds. The previous shift-up setting will be displayed in the tachometer gauge;
- To change the shift-up indicator light mode, push the MODE button and the shift-up indicator light will shift between bright, dim, and off. The shift-up engine speed can only be adjusted when the light is on
- To adjust the shift-up engine speed, press the RESET button and the shift-up engine speed timin advances in 250 rpm increments up to 15,500. Once 15,500 is reached while advancing, the increments reverse.
- To complete the adjustment, push the MODE button and RESET button simultaneously for more than two seconds. The tach now operates normally.
Just remember, at that RPM range you want to keep your eyes on the road.

John

[spools]

yea, i bought mine from comp.... did you buy gap coverage from them????? if so, you might wanna check and make sure they processed the paperwork for it and didnt pocket the 500 bucks you paid for it. my bike was stolen and i ended up having to go to court with them to get them to pay my bike off. turns out, they have done it to several people in hopes that nobody ends up using their gap coverage and finds out...